Dell Alienware m15 Ryzen Edition R5 Service Manual - Page 9
Removing and installing components, Recommended tools, Screw list
View all Dell Alienware m15 Ryzen Edition R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type Quantity M2.5x1.7+3.3L (captive screw) 4 Screw image Base cover M2.5x8.5+3.5L (captive 2 screw) Base cover M2.5x5 2 Solid-state drive in SSD slot one M2x4 2 Solid-state drive in SSD slot two M2x4 2 I/O board M2x4 1 I/O board M2x2 1 Wireless-card bracket M2x4 1 Display hinges M2.5x5 6 Battery M2x4 4 9