Dell Alienware x15 R2 Service Manual - Page 47
Installing the keyboard-controller board
View all Dell Alienware x15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. Remove the two screws (M2x1.9) that secure the keyboard-controller board bracket to the palm-rest and keyboard assembly. 2. Peel the tape that secures the keyboard-controller board bracket to the palm-rest and keyboard assembly. 3. Lift the keyboard-controller board bracket off the keyboard-controller board. 4. Open the latch and disconnect the keyboard-backlight cable from the keyboard-controller board. 5. Open the latch and disconnect the touchpad-light cable from the keyboard-controller board. NOTE: Your computer may be shipped with an touchpad-light cable depending on the configuration you have ordered. 6. Open the latch and disconnect the keyboard-controller board cable from the keyboard-controller board. 7. Open the latch and disconnect the touchpad cable from the keyboard-controller board. 8. Open the latch and disconnect the keyboard cable from the keyboard-controller board. 9. Remove the two screws (M1.6x1.6) that secure the keyboard-controller board to the palm-rest and keyboard assembly. 10. Lift the keyboard-controller board off the palm-rest and keyboard assembly. Installing the keyboard-controller board Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the keyboard-controller board and provides a visual representation of the installation procedure. 47