Dell Brocade 300 Fabric Watch Administrator's Guide v7.1.0 - Page 32
Fabric Watch support in Access Gateway mode
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1 Fabric Watch support in Access Gateway mode Time bases specify the time interval between two samples to be compared. You can set the time base to day (samples are compared once a day), hour (samples are compared once an hour), or minute (samples are compared every minute). Second samples are not advisable. This configurable field affects the comparison of sensor-based data with user-defined threshold values. See "Time bases" on page 16 for more information. Fabric Watch support in Access Gateway mode Both the Advanced Performance Monitoring (APM) license and the Fabric Watch license must be installed on the platform configured in Access Gateway (AG) mode to use the frame monitoring and end-to-end (EE) monitoring capabilities. The APM license provides the counters and the Fabric Watch license provides the monitoring and alert mechanisms for these counters. See "Setting the high threshold of the RX area of an EE monitor" on page 48 for configuration information. The following classes are not supported in Access Gateway mode: • Fabric • Security • E_Port (Port subclass) • VE_Port (Port subclass) 12 Fabric Watch Administrator's Guide 53-1002752-01