Dell Brocade 300 Hardware Reference Manual - Page 27
LED Name, LED Color, Status of Hardware, Recommended Action
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Interpreting LED Activity 3 TABLE 2 Brocade 5000 LED Patterns During Normal Operation (Continued) LED Name LED Color Status of Hardware Recommended Action System Status No light System is off, boot is not complete, or boot failed. Verify that system is on and has completed booting. Steady green System is on and power supplies are functioning properly. No action required. Steady amber (for more than five seconds) Boot failed, the system is faulty. Perform the following steps: 1. Connect a serial cable to the system. 2. Reboot the system. 3. Check the failure indicated on the system console. 4. Contact Technical Support. Flashing amber/green Attention is required. A number of variables can cause this status including a single power supply failure, a fan failure, or one or more environmental ranges has exceeded. Check the management interface and the error log for details on the cause of status. Contact Technical Support if required. Ethernet Speed No light Steady green Port speed is 10 Mb/sec. Port speed is 100 Mb/sec. No action required. No action required. Ethernet Link No light There is no link. Verify that the Ethernet cable is connected correctly. Steady amber There is a link. No action required. Flashing There is link activity (traffic). No action required. amber/no light Brocade 5000 Hardware Reference Manual 17 Publication Number: 53-1000424-03