Dell Brocade 5100 Brocade 7.3.0 Fabric OS Command Reference - Page 749
portcfg mgmtif ge0 create 192.168.1.10 255.255.255.0, portcfg mgmtroute ge0 create 192.168.3.0
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 749 highlights
portCfg 2 To modify an existing circuit so it becomes the initiator (the following example uses the string option): switch:admin> portcfg fcipcircuit 16 \ modify 2 --connection-type initiator !!!! WARNING !!!! Modify operation can disrupt the traffic on the fcipcircuit specified \ for a brief period of time. This operation will bring the existing \ circuit down (if circuit is up) before applying new configuration. Continue with Modification (Y,y,N,n): [n]y Operation Succeeded To configure an IPSec-enabled tunnel to connect with an IPSec-configured tunnel in legacy mode: switch:admin> portcfg fciptunnel 8/12 modify --legacy enable !!!! WARNING !!!! Modify operation can disrupt the traffic on the fciptunnel specified \ for a brief period of time. This operation will bring the existing \ tunnel down (if tunnel is up) before applying new configuration.\ Continue with Modification (Y,y,N,n): [n]y Tunnel 8/12 modify: Operation Succeeded To create inband management interfaces for two Brocade 7800 switches on the same subnet: 1. Configure each switch. switch:admin> portcfg mgmtif ge0 create 192.168.3.10 255.255.255.0 switch:admin> portcfg mgmtif ge0 create 192.168.3.20 255.255.255.0 2. Access the switch through the external inband management interface. linux# telnet 192.168.3.10 To create inband management interfaces for two Brocade 7800 switches on different subnets connected by two routers: 1. Configure the inband management interfaces on the first switch. switch:admin> portcfg mgmtif ge0 create 192.168.1.10 255.255.255.0 2. Configure the inband management route for the management station. switch:admin> portcfg mgmtroute ge0 create 192.168.3.0 255.255.255.0 192.168.1.250 3. Configure the inband management interfaces on the second switch. switch:admin> portcfg mgmtif ge0 create 192.168.2.20 255.255.255.0 4. Configure the inband management route for the management station. switch:admin> portcfg mgmtroute ge0 create 192.168.3.0 255.255.255.0 192.168.2.250 Fabric OS Command Reference 719 53-1003131-01