Dell Brocade 5100 Brocade 7.3.0 Fabric OS Troubleshooting and Diagnostics Guid - Page 59
Configuring a port to be a mirror port, Adding a port mirror connection
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Port mirroring 3 TABLE 9 Model FS8-18 FX8-24 Maximum number of mirror connections (Continued) Maximum number of mirror connections (chassis-wide) 3 3 Configuring a port to be a mirror port 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the portCfg mirrorport [slot number/] port number --enable command. NOTE The enable command enables the port as a mirror port. The disable command disables the mirror port configuration. Adding a port mirror connection 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the portMirror --add slotnumber/portnumber SourceID DestID command. The configuration database keeps information about the number of port mirror connections configured on a switch, the number of chunks of port mirroring data that are stored, and the chunk number. Deleting a port mirror connection 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the portMirror --del SourceID DestID command. For example, to delete the port mirror connection on mirror port 2, you could enter the following command: switch:admin> portMirror --del 0x011400 0x240400 When removing a mirror connection, always use this method to ensure that the data is cleared. Deleting a connection removes the information from the database. Fabric OS Troubleshooting and Diagnostics Guide 43 53-1003141-01