Home » Dell Manuals » Hubs & Switches » Dell Brocade 6505 » Manual Viewer

Dell Brocade 6505 Converged Enhanced Ethernet Command Reference - Page 55

debug lacp, Turns on Network Services Module NSM debugging.

Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

debug lacp 2 debug lacp Synopsis Enables debugging for the Link Aggregation Control Protocol (LACP). debug lacp {all | cli | ha | event | nsm | pdu {rx all | rx interface tengigabitethernet slot/port} | tx all | tx interface tengigabitethernet slot/port}| sync | timer | trace level number} no debug lacp {all | cli | event | nsm | pdu {rx all | rx interface tengigabitethernet slot/port} | tx all | tx interface tengigabitethernet slot/port}| sync | timer | trace level number} Operands all Turns on all debugging. cli Turns on command line interface (CLI) debugging. ha Turns on High Availablity debugging. event Turns on event debugging. nsm Turns on Network Services Module (NSM) debugging. pdu Turns on protocol data unit (PDU) debugging. rx all Turns on debugging for received LACP packets on all interfaces. rx interface Turns on debugging for received LACP packets on the specified interface. interface tengigabitethernet Specifies the 10 Gbps Ethernet interface. slot Specifies the slot number. port Specifies the port number. tx all Turns on debugging for transmitted LACP packets on all interfaces. tx interface Turns on debugging for transmitted LACP packets on the specified interface. interface tengigabitethernet Specifies the 10 Gbps Ethernet interface. slot Specifies the slot number. port Specifies the port number. sync Turns on debugging for LACP sync transitions. timer trace level number Turns on debugging for LACP timers. Specifies the trace level number. The range of valid values is from 1 through 7. Defaults By default, debugging is not turned on. The default trace level is 6. Command Modes Privileged EXEC mode EXEC mode Description Use this command to enable debugging for Link Aggregation Control Protocol (LACP). Use the no debug command to disable debugging. Converged Enhanced Ethernet Command Reference 37 53-1002508-01

Section	Page
Contents	5
About This Document	13
In this chapter	13
How this document is organized	13
Supported hardware and software	13
What’s new in this document	14
Document conventions	14
Text formatting	14
Command syntax conventions	15
Notes, cautions, and warnings	15
Key terms	15
Notice to the reader	16
Additional information	16
Brocade resources	16
Other industry resources	16
Getting technical help	17
Document feedback	17
CLI Basics	19
In this chapter	19
Management tools	19
CEE command line interface	19
Saving your configuration changes	20
CEE CLI RBAC permissions	20
Accessing the CEE CLI through the console or Telnet	20
Accessing the CEE CLI from the Fabric OS shell	21
CEE CLI command modes	21
CEE CLI keyboard shortcuts	23
Using the do command as a shortcut	24
Displaying CEE CLI commands and command syntax	24
CEE CLI command completion	25
CEE CLI command output modifiers	25
CEE Commands	27
advertise dcbx-fcoe-app-tlv	27
advertise dcbx-fcoe-logical-link-tlv	28
advertise dcbx-iscsi-app-tlv	29
advertise dcbx-tlv	30
advertise dot1-tlv	31
advertise dot3-tlv	32
advertise optional-tlv	33
bridge-priority	34
cee	35
cee-map	36
channel-group	37
cisco-interoperability	38
clear counters	39
clear counters access-list mac	40
clear dot1x statistics	41
clear dot1x statistics interface	42
clear ip igmp group	43
clear ip igmp groups	44
clear lacp	45
clear lacp counters	46
clear lldp neighbors	47
clear lldp statistics	48
clear mac-address-table dynamic	49
clear spanning-tree counter	50
copy	51
debug dot1x packet	53
debug ip igmp all	54
debug lacp	55
debug lldp packet	57
debug spanning-tree	58
delete	59
deny (extended ACLs)	60
deny (standard ACLs)	62
description (interface)	63
description (LLDP)	64
dir	65
disable	66
do	67
dot1x authentication	68
dot1x enable	69
dot1x port-control	70
dot1x protocol-version	71
dot1x quiet-period	72
dot1x reauthenticate interface	73
dot1x reauthentication	74
dot1x reauthMax	75
dot1x timeout re-authperiod	76
dot1x timeout server-timeout	77
dot1x timeout supp-timeout	78
dot1x timeout tx-period	79
enable	80
end	81
erase flash	82
error-disable-timeout enable	83
error-disable-timeout interval	84
exec-timeout	85
exit	86
fcoe-map	87
fcoeport	88
fcoe-priority-bits	89
fcoe-vlan	90
forward-delay	91
fos	92
hello	94
hello-time	95
instance	96
interface	97
interface vlan	98
ip igmp last-member-query-interval	99
ip igmp query-interval	100
ip igmp query-max-response-time	101
ip igmp snooping enable (global version)	102
ip igmp snooping enable (VLAN version)	103
ip igmp snooping fast-leave	104
ip igmp snooping mrouter	105
ip igmp snooping mrouter-timeout	106
ip igmp snooping querier	107
ip igmp static-group	108
iscsi-priority-bits	109
lacp system-priority	110
lacp timeout	111
line console	112
line vty	113
lldp dcbx-version	114
lldp disable	115
lldp fcoe-priority-bits	116
lldp iscsi-priority-bits	117
lldp profile	118
logout	119
mac access-group	120
mac access-list extended	121
mac access-list standard	122
mac-address-table	123
max-age	124
max-hops	125
mode	126
mtu	127
multiplier	128
permit (extended ACLs)	129
permit (standard ACLs)	131
port-channel path-cost	132
priority-group-table	133
priority-table	134
profile	136
protocol lldp	137
protocol spanning-tree	138
pwd	139
qos cos	140
qos cos-mutation	141
qos cos-traffic-class	142
qos map cos-mutation	143
qos map cos-traffic-class	144
qos queue multicast scheduler	145
qos queue scheduler	146
qos rcv-queue multicast rate-limit	148
qos rcv-queue multicast threshold	149
qos trust cos	150
quit	151
region	152
rename	153
resequence access-list mac	154
revision	155
rmon alarm	156
rmon collection	157
rmon event	158
seq (extended MAC ACLs)	159
seq (standard MAC ACLs)	161
show accounting	162
show calendar	163
show cee maps	164
show clock	165
show debug ip igmp	166
show debug lacp	167
show debug lldp	168
show debug spanning-tree	169
show dot1x	170
show dot1x all	171
show dot1x diagnostics interface	172
show dot1x interface	173
show dot1x session-info interface	174
show dot1x statistics interface	175
show environment	176
show file	177
show history	178
show interface	179
show ip igmp groups	181
show ip igmp interface	182
show ip igmp mrouter	183
show ip igmp snooping	184
show ip interface	185
show lacp counter	187
show lacp sys-id	188
show line	189
show lldp	190
show lldp interface	191
show lldp neighbors	192
show lldp statistics	194
show logging	195
show mac access-group	196
show mac-address-table	197
show media	199
show media interface	200
show media linecard	201
show port-channel	202
show power supply	203
show privilege	204
show processes cpu	205
show processes memory	206
show qos flowcontrol interface	207
show qos interface	208
show qos maps	210
show qos queue interface	211
show qos rcv-queue interface	212
show qos rcv-queue multicast	213
show rmon	214
show running-config	216
show running-config access-list mac	217
show running-config cee-map	218
show running-config dot1x	219
show running-configuration igmp	220
show running-config interface port-channel	221
show running-config interface tengigabitethernet	222
show running-config interface vlan	223
show running-config linecard	224
show running-config rmon	225
show spanning-tree	226
show spanning-tree brief	227
show spanning-tree interface	228
show spanning-tree mst brief	229
show spanning-tree mst detail	230
show spanning-tree mst instance	232
show spanning-tree mst-config	233
show spanning-tree mst interface	234
show startup-config	235
show statistics access-list interface	236
show statistics access-list mac	237
show system	239
show tech-support	240
show users	241
show version	242
show vlan	243
show vlan classifier	244
shutdown (interface)	245
shutdown (Spanning Tree Protocol)	246
spanning-tree autoedge	247
spanning-tree cost	248
spanning-tree edgeport	249
spanning-tree guard root	250
spanning-tree hello-time	251
spanning-tree instance	252
spanning-tree link-type	253
spanning-tree portfast	254
spanning-tree priority	255
spanning-tree restricted-role	256
spanning-tree restricted-tcn	257
spanning-tree shutdown	258
spanning-tree tc-flush-standard	259
switchport	260
switchport access	261
switchport converged	262
switchport mode	263
switchport trunk	264
system-description	265
system-name	266
terminal length	267
terminal monitor	268
transmit-holdcount	269
undebug	270
vlan classifier activate group	271
vlan classifier group	272
vlan classifier rule	273
write erase	274

Match case Limit results 1 per page

Converged Enhanced Ethernet Command Reference

53-1002508-01

debug lacp

Enables debugging for the Link Aggregation Control Protocol (LACP).

Synopsis

debug lacp

{

all

cli

event

nsm

pdu

{

rx all

rx interface tengigabitethernet

slot/port

} |

all

tx interface tengigabitethernet

slot/port

sync

timer

trace level

number

}

no debug lacp

{

all

cli

event

nsm

pdu

{

rx all

| rx

interface tengigabitethernet

slot/port

} |

tx all

tx interface tengigabitethernet

slot/port

sync

timer

trace level

number

}

Operands

all

Turns on all debugging.

cli

Turns on command line interface (CLI) debugging.

Turns on High Availablity debugging.

event

Turns on event debugging.

nsm

Turns on Network Services Module (NSM) debugging.

pdu

Turns on protocol data unit (PDU) debugging.

rx all

Turns on debugging for received LACP packets on all interfaces.

rx interface

Turns on debugging for received LACP packets on the specified

interface.

interface tengigabitethernet

Specifies the 10 Gbps Ethernet interface.

slot

Specifies the slot number.

port

Specifies the port number.

tx all

Turns on debugging for transmitted LACP packets on all interfaces.

tx interface

Turns on debugging for transmitted LACP packets on the specified interface.

interface tengigabitethernet

Specifies the 10 Gbps Ethernet interface.

slot

Specifies the slot number.

port

Specifies the port number.

sync

Turns on debugging for LACP sync transitions.

timer

Turns on debugging for LACP timers.

trace level

number

Specifies the trace level number. The range of valid values is from 1 through

Defaults

By default, debugging is not turned on. The default trace level is 6.

Command

Modes

Privileged EXEC mode

EXEC mode

Description

Use this command to enable debugging for Link Aggregation Control Protocol (LACP). Use the

debug

command to disable debugging.