Dell Brocade 6510 Brocade Fabric OS v7.0.1 Release Notes v1.0 - Page 16

Supported Products and FOS Interoperability Secure Fabric OS (on any model) Mi10k, M6140, ED-6064, ES-3232, ES-4300, ES-4400, ES-4500, ES4700 (McDATA Fabric Mode and Open Fabric Mode) 1 McDATA ED-5000 32-port FC director Not Supported Direct E_Port connections are not supported - must use FCR. M-EOS v9.9.5 or later Not Supported Multi-Protocol Router Interoperability Brocade 7420 Brocade 7500 and FR4-18i blade McDATA SANRouters 1620 and 2640 Not supported V6.2.2 and higher 4 6 Not Supported NOS (VDX Platform) Interoperability Brocade VDX6710, VDX6720, VDX6730 NOS v2.1.1 or later7 Table Notes: 1 When routing to an M-EOS edge fabric using frame redirection, the M-EOS fabric must have a FOS-based product in order to configure the frame redirection zone information in the edge fabric. 2 When directly attached to a Host or Target that is part of an encryption flow. 3 These platforms may not be directly attached to hosts or targets for encryption flows. 4 McDATA 1620 and 2640 SANRouters should not be used with FOS-based routing (FCR) for connections to the same edge fabric. 5 FA4-18 is not supported in a DCX/DCX-4S that is running FOS v7.0 or later 6 If operating with FOS v6.2.2e or earlier, Adaptive Networking QoS must be disabled when connecting to 16G FC platform. Otherwise, ISL will segment. 7 Connectivity to FC SAN is established via VDX6730 connected to FCR running FOS v7.0.1 or later. FCR platforms supported include 5100, VA-40FC, 5300, 7800, DCX, DCX-4S, DCX8510-8, DCX8510-4, 6510. For higher FCR backbone scalability (refer to separate ―Brocade SAN Scalability Guidelines‖ documentation for details), please use 5300, DCX, DCX-4S, DCX8510-8, DCX8510-4. Fabric OS v7.0.1 Release Notes v1.0 Page 16 of 67