Dell Brocade 6510 Fabric OS Troubleshooting and Diagnostics Guide v7.1.0 - Page 90
Segmented fabrics, The name of the zone to be displayed. If the name is omitted, the command
View all Dell Brocade 6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
9 Segmented fabrics If you enter the cfgShow command to display information about all zones, the TI zones appear in the defined zone configuration only and do not appear in the effective zone configuration. 1. Connect to the switch and log in as admin. 2. Enter the zone --show command. zone --show [name] where: name The name of the zone to be displayed. If the name is omitted, the command displays information about all TI zones in the defined configuration. To display information about the TI zone purplezone: switch:admin> zone --show purplezone Defined TI zone configuration: TI Zone Name: redzone: Port List: 1,2; 1,3; 3,3; 4,5 Configured Status: Activated / Failover-Enabled Enabled Status: Activated / Failover-Enabled To display information about all TI zones in the defined configuration: switch:admin> zone --show Defined TI zone configuration: TI Zone Name: greenzone: Port List: 2,2; 3,3; 5,3; 4,11; Configured Status: Activated / Failover-Enabled Enabled Status: Activated / Failover-Enabled TI Zone Name: purplezone: Port List: 1,2; 1,3; 3,3; 4,5; Configured Status: Activated / Failover-Enabled Enabled Status: Deactivated / Failover-Enabled TI Zone Name: bluezone: Port List: 9,2; 9,3; 8,3; 8,5; Configured Status: Deactivated / Failover-Disabled Enabled Status: Activated / Failover-Enabled Segmented fabrics This section discusses fabric segmentation. Fabric segmentation occurs when two or more switches are joined together by ISLs and do not communicate to each other. Each switch appears as a separate fabric when you use the fabricShow command. 74 Fabric OS Troubleshooting and Diagnostics Guide 53-1002751-01