Dell Brocade M5424 Brocade 7.1.0 Web Tools Administrator's Guide - Page 237
Activating an Allow / Prohibit Matrix configuration
View all Dell Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Allow / Prohibit Matrix configuration 16 FIGURE 45 Allow / Prohibit Matrix Configuration dialog box Activating an Allow / Prohibit Matrix configuration When you activate a saved Allow / Prohibit Matrix configuration on the switch, the preceding configuration (currently activated) is overwritten. To activate an Allow / Prohibit Matrix configuration, perform the following steps. 1. Open theAllow / Prohibit Matrix configuration list. 2. Select the saved configuration from the list. 3. Click Activate. The Activate Allow / Prohibit Matrix Configuration confirmation dialog box displays. The message reminds you that the current configuration will be overwritten upon activation. 4. Optional: Click Active=Saved Mode to enable (selected) or disable (not selected) the Active=Saved FMS parameter after the configuration is activated. 5. Click Yes to activate the configuration or click No to cancel the activation. Copying an Allow / Prohibit Matrix configuration To copy an Allow / Prohibit Matrix configuration to a new configuration, perform the following steps. 1. Display the Allow / Prohibit Matrix configuration list. 2. Select a saved configuration or the active configuration from the list. Web Tools Administrator's Guide 209 53-1002756-01