Dell Brocade M5424 Brocade 7.1.0 Web Tools Administrator's Guide - Page 97
Considerations for enabling or disabling a port, Persistent enabling and disabling ports
View all Dell Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Persistent enabling and disabling ports 5 NOTE If the Enable or Disable option is gray (unavailable), the port is already in the enabled or disabled state. For example, if the Enable option is unavailable, the port is already enabled. If you select multiple ports in both enabled and disabled states, both options are active. When you click either option, the action is applied to all selected ports. 6. Optional: If you are accessing a Brocade 7800 switch, you can set the media type for the GE0 and GE1 GigE ports to either copper or optical. a. Select the GigE Ports tab. b. Select either the GE0 or GE1 port. c. Select either Copper or Optical from the Media Type selection list. 7. Click Yes in the confirmation window. Considerations for enabling or disabling a port You should understand the following limitations and conditions when enabling or disabling a port: • On FR4-18i and FC4-16IP port blades, all ports are disabled by default. You can disable and re-enable them as needed. • If a port is not licensed you cannot enable it until you install the appropriate license, such as a Ports on Demand or N_Port ID Virtualization license (refer to "Port activation" on page 71 for more information). The Licensed field located in the General tab in the Port Admin tab indicates whether a port is licensed. • If you disable a principal ISL port (an ISL port that is designated by the fabric to be a part of the path to communicate with the principal switch), the fabric automatically reconfigures. • If you disable a port that was connected to a device, that device is no longer accessible from the fabric. For more information, refer to Fabric OS Administrator's Guide. Persistent enabling and disabling ports To enable or disable a port so that it remains enabled or disabled across switch restarts, perform the following steps. NOTE Ports cannot be persistently enabled or disabled when FMS is enabled. 1. Select a port in the Switch View to open the Port Admin tab. 2. Select the FC Ports, VE/VEx Ports, ICL Ports, or GigE Ports tab. 3. From the tree on the left, select the switch or slot that contains the port. 4. From the table, select one or more ports. NOTE Use Shift-click and Ctrl-click to select multiple ports. You can select multiple ports from the table. You cannot select multiple ports from the tree. Web Tools Administrator's Guide 69 53-1002756-01