Dell C3765dnf Color Laser Printer User's Guide - Page 229
Print and Forward, Fax Forwarding Number
View all Dell C3765dnf Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Junk Fax Setup On Sent Fax Forward Off Off Forward Print and Forward Print and E-mail Fax Forwarding Number 2 Sided Printing On Off Remote Receive On Off Remote Receive Tone Discard Size Available Range: 00-99 Off On Auto Reduction Redial Attempts Available Range: 0-13 Interval of Redial Available Range: 1-15 minutes Resend Delay Available Range: 3-255 seconds Tone / Pulse Prefix Dial Prefix Dial Number Tone Pulse (10PPS) Pulse (20PPS) On Off Fax Cover Page On Off Fax Header*1 On Off ECM On Off Rejects faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone Book. Does not reject faxes sent from unwanted numbers. Does not forward any of the incoming faxes to a specified destination. Forwards the incoming faxes to a specified destination. Prints the incoming fax and forwards it to a specified destination. Prints incoming faxes and also forward them to a specified e-mail address. Sets the destination to which incoming faxes will be forwarded. Prints the received fax on both sides of a sheet of paper. Does not print the received fax on both sides of a sheet of paper. Receives a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Does not receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the telephone. Sets the tone to start Remote Receive. Prints any excess at the bottom of a fax page without discarding it. Discards any excess at the bottom of the page. Automatically reduces a fax page to fit it onto the appropriate sized paper. Sets the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 13. Sets the interval between redial attempts within the range of 1 to 15 minutes. Sets the interval between transmission attempts within the range of 3 to 255 seconds. Sets the dialing type to Tone. Sets the dialing type to Pulse (10PPS). Sets the dialing type to Pulse (20PPS). Sets a prefix dial number. Does not set a prefix dial number. Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started. Attaches a cover page to faxes. Does not attach a cover page to faxes. Prints the information of the sender on the header of faxes. Does not print the information of the sender on the header of faxes. Enables the ECM (Error Correction Mode). To use the ECM, the remote machines must also support the ECM. Disables the ECM. Understanding the Tool Box Menus 227