Dell C600 Service Manual - Page 26
Replacing the Display-Assembly Top Cover, Replacing the 12.1-Inch Display Panel
UPC - 049001046945
View all Dell C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual 6. Remove the M2 x 4-mm screw that secures the display-feed flex cable to the display assembly through the black plastic flex cable retention bracket (see "12.1-Inch Display Assembly Bezel and Panel"). 7. Lift up the right side of the display panel, and pull the panel out of the display-assembly top cover at an angle. Replacing the Display-Assembly Top Cover If you are replacing the display-assembly top cover, remove the support bracket. 1. Remove the two M2 x 4-mm screws on the left side of the display-assembly top cover and the two M2 x 4-mm screws on the right side of the displayassembly top cover. 2. Lift the support bracket out of the display-assembly top cover. Replacing the 12.1-Inch Display Panel 1. Place the left edge of the display panel against the left side of the support bracket in the displayassembly top cover, and elevate the right side of the panel with your hand. 2. Lay the display panel into the display-assembly top cover. 3. Reinstall the four M3 x 3-mm screws that secure the display panel to the support bracket. Removing the Display-Feed Flex Cable (12.1-Inch Display Panel) Display-Feed Flex Cable file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (19 of 40) [2/28/2004 7:53:33 AM]