Dell C600 Service Manual - Page 36
Microprocessor Module - latitude replacement fan
UPC - 049001046945
View all Dell C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual 2. Remove the keyboard assembly. 3. Remove the display assembly. 4. Remove the palmrest assembly. 5. Remove the thermal cooling assembly. 6. Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure the hybrid cooling fan to the system board. 7. Disconnect the fan power cable from the system board interface connector and remove the hybrid cooling fan. NOTE: The fan power cable is long, and can be pulled out from under the EMI shield to provide access to the connector. NOTICE: Do not block the keyboard screw hole when reinserting the fan cable. Microprocessor Module Microprocessor Modules NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor. file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (29 of 40) [2/28/2004 7:53:33 AM]