Dell DR4100 DR Series System Release Notes for Version 3.2.0.2 - Page 22
Workaround/Solution, after upgrade. - software upgrade
View all Dell DR4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ID 19655 19614 19576 19233 19184 19091 Issue Description smbd fix for unique corner case that causes a core Need to remove error reporting on the following errors: OST images not found and vRanger errors If you set up two bond interfaces with two different subnets but use the same static IP address, the configuration service fails. Need to clear the error, "file system is corrupt and please run consistency checker," after a system -init During container delete, cleaner does not start. Cannot collect diagnostics if an upgrade fails. 18833 The Reboot link is enabled after a DR Series system software upgrade. 18742, 18629 18664 18661 18154 With CIFS, backups are failing, with error "The specified network name is no longer available..." after upgrade. On the DR Series system log on page, if you enter an invalid user name, the Your password was not correct error displays. If you power on a new MD1200 expansion enclosure (that is cabled in) while the base DR Series system is operational, the machine may go into maintenance mode with the following reason error code: One of the storage enclosure has become offline, please power-off the appliance, fix the connectivity issues and power-on the appliance. Include racadm in DR image so that the DRAC settings can be managed from inside of the OS instead of lifecycle controller. Workaround/Solution Corrected in version 3.1. Corrected in version 3.1. Corrected in version 3.1. Corrected in version 3.1. Corrected in version 3.1. Corrected in version 3.1. Using the "diagnostics --start --service" command can start the diagnostic service if it is down after upgrade failure. Once the service is up, diagnostics can be collected. Corrected in version 3.1. The Reboot link is enabled during upgrade and has now been disabled during upgrade. It can be selected once the upgrade is complete. Corrected in version 3.1. Corrected in version 3.1. The correct error message is now displayed. Corrected in version 3.1. Corrected in version 3.1. 22