Dell DSS 9600 EMC Servers Installation and Service Manual - Page 55
Removing processor
View all Dell DSS 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4 Push the release latches to unlock the heat sink. 5 Remove the processor assembly and heat sink. Figure 9. Removing the heat sink 1 Separate the heat sink and the processor. 2 Remove the processor. 3 Complete the procedure listed in After working inside your system. Removing processor NOTE: If the new heat sink includes a thermal pad, it is not necessary to apply thermal grease to the top of the processor. 1 Ensure that you read the Safety instructions. 2 Before upgrading your system, download the latest system BIOS version from http://dell.com/support and follow the instructions included in the compressed download file to install the update on your system. NOTE: You can update the system BIOS using the Lifecycle Controller. For more information about Dell Lifecycle controller, see http://dell.com/idracmanuals. 3 Complete the procedure listed in Before working inside your system. 4 Remove the heat sink. 1 Press the locking latches on all sides of the assembly and lift the heat sink out. 2 Remove the heat sink to expose the carrier and processor. Installing and removing server components 55