Dell DX6012S Hardware Owner's Manual - Page 102
Rotate the processor shield upward and out of the way. See
View all Dell DX6012S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 3-16. Installing and Removing the Heat Sink 1 2 1 heat sink heat-sink 2 retention screws (4) 10 Rotate the processor shield upward and out of the way. See Figure 3-17. 11 Lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor. CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board. NOTE: In single-processor configurations, a processor must be installed in socket CPU1. Install the blank in socket CPU2 only. 106 Installing System Components
106
Installing System Components
Figure 3-16.
Installing and Removing the Heat Sink
10
Rotate the processor shield upward and out of the way. See Figure 3-17.
11
Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
CAUTION:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
NOTE:
In single-processor configurations, a processor must be installed in socket
CPU1. Install the blank in socket CPU2 only.
1
heat sink heat-sink
2
retention screws (4)
2
1