Dell Dimension 1000 Owner's Manual - Page 76
Connect the power cable to the system board see
View all Dell Dimension 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
securing screw drive extra alignment screws (2 or 4) alignment screws (2) 4 After the drive is in place, apply pressure to ensure that the drive is fully seated. 5 Use the securing screw that came with the drive to attach the drive to the computer. NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1"). 6 Connect the power cable to the system board (see page 54). 7 Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data connector to the new drive. power cable 76 Removing and Installing Parts first CD/DVD connector (primary drive) second CD/DVD connector (secondary drive)
76
Removing and Installing Parts
4
After the drive is in place, apply pressure to ensure that the drive is fully seated.
5
Use the securing screw that came with the drive to attach the drive to the computer.
NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
6
Connect the power cable to the system board (see page 54).
7
Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data
connector to the new drive.
drive
alignment screws (2)
securing
screw
extra alignment
screws (2 or 4)
power cable
first CD/DVD
connector
(primary drive)
second CD/DVD connector
(secondary drive)