Dell Dimension 5150C Owner's Manual - Page 72
Removing a PCI Express Card, outlets, and then turn them on.
View all Dell Dimension 5150C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
10 Close the card retention door by snapping it into place. retention arm PCI Express card edge connector card connector NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 11 Connect any cables that should be attached to the card. See the documentation that came with the card for information about the card's cable connections. NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer. 12 Replace the computer cover (see page 93), reconnect the computer and devices to electrical outlets, and then turn them on. 13 Install any drivers required for the card as described in the card documentation. Removing a PCI Express Card 1 Follow the procedures in "Before You Begin" on page 55. 2 If necessary, disconnect any cables connected to the card. 3 Gently pull back the securing tab, grasp the card by its top corners, and then ease it out of its connector. 72 Removing and Installing Parts