Dell EqualLogic PS6210X PS6210 Hardware Owners Manual - Page 7
Basic Storage Array Information, About the PS6210 Array, Recommended Tools, Protecting Hardware
View all Dell EqualLogic PS6210X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Basic Storage Array Information This chapter includes information about the location and basic operation of the replaceable components in a storage array, tools and equipment you will need, protecting hardware from electrostatic discharge, and power on and off operations. About the PS6210 Array The PS6210 is a PS6x10 10GbE class EqualLogic® PS Series array that continues the focus by Dell™ on industry-standard features and capabilities for the midrange iSCSI SAN market. PS6210 Features The PS6210 array is available in two different form factors, a 2U chassis with 24 2.5-inch drives, and a 4U chassis with 24 3.5-inch drives. Features of the PS6210 array include: • Two hot-swappable Type 15 control modules, which contain increased memory (16GB per controller) and a more powerful processor than previous generation controllers • Ethernet ports: - Two pairs of 10Gb/s dual-media interfaces (10GBASE-T/SFP+) - Ability to auto-negotiate down to 1Gb/s interface (10GBASE-T ports only) • Support for ReadyRails™ II Recommended Tools You will need the following items to perform the procedures in this section: • Bezel key • Wrist grounding strap Protecting Hardware Protect your PS Series array from electrostatic discharge. When handling array hardware, use an electrostatic wrist strap or a similar form of protection. To use a wrist strap: 1. Connect the steel snap on the coil cord to the stud on the elastic band. See Figure 1. 1