Dell EqualLogic PS6210XS PS6210 Hardware Owners Manual - Page 19

Removing a Drive Blank, Installing a 3.5-inch Drive

Get Dell EqualLogic PS6210XS PDF manuals and user guides View all Dell EqualLogic PS6210XS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

PS6210 Hardware Owner's Manual 2 Maintaining Drives 4. Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the drive (callout 3). 5. Push in the handle until you hear a click (callout 4). Figure 13: Installing a 3.5-inch Drive Verify that the new drive is operational by examining the LEDs on the front panel, as described in Interpreting Drive LEDs on page 7. In addition, examine the GUI Member Disks window and the CLI member select show disks command output. Removing a Drive Blank To maintain proper system cooling, all empty drive slots must have drive blanks installed. 1. Remove the bezel. See Removing the Bezel on page 2. 2. Press the release tab and slide the drive blank out until it is free of the drive slot. See Figure 14 or Figure 15 and the callouts in.Table 5. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
PS6210 Hardware Owner's Manual
2 Maintaining Drives
4.
Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the
drive (callout 3).
5.
Push in the handle until you hear a click (callout 4).
Figure 13: Installing a 3.5-inch Drive
Verify that the new drive is operational by examining the LEDs on the front panel, as described in
Interpreting Drive LEDs on page 7
. In addition, examine the GUI Member Disks window and the CLI
member select show disks
command output.
Removing a Drive Blank
To maintain proper system cooling, all empty drive slots must have drive blanks installed.
1.
Remove the bezel. See
Removing the Bezel on page 2
.
2.
Press the release tab and slide the drive blank out until it is free of the drive slot. See
Figure 14
or
Figure 15
and the callouts in
.
Table 5
.
13