Dell Equallogic PS4110XV PS4110 Hardware Owners Manual - Page 18
Removing a Drive Blank, Installing a 3.5-inch Drive
View all Dell Equallogic PS4110XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Hardware Owner's Manual 2 Maintaining Drives 3. Hold the drive by the carrier and slide the drive most of the way into a slot (callout 1 in Figure 11). 4. Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the drive (callout 3). 5. Push in the handle until you hear a click (callout 4). Figure 11: Installing a 3.5-inch Drive Verify that the new drive is operational by examining the LEDs on the front panel, as described in Interpreting Drive LEDs on page 8. In addition, examine the GUI Member Disks window and the CLI member select show disks command output. Removing a Drive Blank Warning: To maintain proper system cooling, all empty drive bays must have drive blanks installed. 14
Hardware Owner's Manual
2 Maintaining Drives
3.
Hold the drive by the carrier and slide the drive most of the way into a slot (callout 1 in
Figure 11
).
4.
Push the drive completely into the slot (callout 2). The drive handle will begin to close onto the drive (callout
3).
5.
Push in the handle until you hear a click (callout 4).
Figure 11: Installing a 3.5-inch Drive
Verify that the new drive is operational by examining the LEDs on the front panel, as described in
Interpreting
Drive LEDs on page 8
. In addition, examine the GUI Member Disks window and the CLI
member select show
disks
command output.
Removing a Drive Blank
Warning:
To maintain proper system cooling, all empty drive bays must have drive blanks installed.
14