Dell FC4700 Setup Guide - Page 6

Before You Start (continued) 2. Verify that your facility has adequate network wiring for your sub-network (subnet) connections. To manage the storage system, each storage processor (SP) requires a separate network connection. 3. If your environment includes switches on the path between the FC4700 and the hosts (servers) that have access to it, make sure the switches are installed. Refer to the device-specific installation manuals for each switch. 4. Verify that the Standby Power Supplies (SPSs), Disk Processor Enclosure (DPE), and any optional Disk Array Enclosures (DAEs) are installed in your cabinet. If necessary, refer to the appropriate cabinet, rail, or device hardware installation documentation you received with your system. 5. Have the network administrator at your facility set up IP addresses for the FC4700 and complete the worksheet provided in Step 1 on page 5. 6. Make sure that the latest revisions of Navisphere® Manager and Event Monitor are installed on the Windows® 2000 or Windows NT® host you will use as the Navisphere management station. Refer to the EMC Navisphere Manager Administrator's Guide, EMC Navisphere Event Monitor Administrator's Guide, and the appropriate Release Notes as necessary. 4