Dell Force10 E300 TeraScale to ExaScale Upgrade Procedure - Page 1
Dell Force10 E300 Manual
View all Dell Force10 E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
TeraScale to ExaScale Upgrade Procedure The E-Series TeraScale is easily upgraded to Force10 Networks E-Series ExaScale. These upgrade requirements outline the necessary components and procedures required to upgrade the E1200i with FTOS version 8.1.1.0. Direct any questions regarding the upgrade to Force10 Networks' Customer Support. E-mail: [email protected] Web: www.force10networks.com/support/ Telephone: US and Canada: 866.965.5800 International: 408.965.5800 Supported Hardware Hardware E1200i Chassis (Note 1) AC Power Supply 2800W DC Power Entry Module Route Processor Module-ExaScale Switch Fabric Module (Note 2) 10 port 10GE line card (10M CAM) 10 port 10GE line card (40M CAM) Fan Tray Catalog Number Minimum Software Version Required CH-E1200I-AC CH-E1200I-DC 8.1.1.1 CC-E1200I-2800W-AC 8.1.1.1 CH-E1200I-DC 8.1.1.1 LC-EH-RPM 8.1.1.1 CC-E-SFM3 8.1.1.1 LC-EH-10GE-10S 8.1.1.1 LC-EJ-10GE-10S 8.1.1.1 CC-E-1200I-Fan 8.1.1.1 Note 1: Do not mix AC and DC power supplies. Note 2: E-Series ExaScale systems and FTOS Release 8.1.1.0 requires SFM version 752-00265-03 Rev 01 or higher. Use the show sfm command to determine if your SFMs need to be upgraded. Do not mix SFMs. All the SFMs in the chassis must run the required minimum software version.