Dell Inspiron 1121 Service Manual - Page 36
Replacing the Memory Modules
View all Dell Inspiron 1121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 memory-module connector 3 memory module 2 securing clips (2) Replacing the Memory Module(s) CAUTION: If you need to install memory modules in two connectors, install a memory module in the lower connector before you install a memory module in the upper connector. 1. Follow the instructions in Before You Begin. 2. Align the notch in the memory module with the tab in the memory-module connector. 3. Slide the memory module firmly into the memory-module connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. 1 tab 2 notch 4. Slide the tabs on the memory-module cover into the slots on the computer base and gently press the memory-module cover into place. 5. Tighten the screw that secures the memory-module cover to the computer base. 6. Replace the battery (see Replacing the Battery). 7. Connect the AC adapter to your computer and an electrical outlet. 8. Turn on the computer. As the computer boots, it detects the memory module(s) and automatically updates the system configuration information. To confirm the amount of memory installed in the computer, click Start ® Control Panel® System and Security® System.