Dell Inspiron 13 5368 2-in-1 Service Manual - Page 97
Removing the sensor board, Prerequisites, Procedure
View all Dell Inspiron 13 5368 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Removing the sensor board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the display assembly. 4 Follow the procedure from step 1 to step 3 in "Removing the display panel". Procedure CAUTION: Place the display-panel assembly on a soft and clean surface to avoid scratching the display. 1 Remove the screw that secures the sensor board to the display panel. 2 Peel off the tape and open the latch to disconnect the sensor-board cable from the sensor board. 97