Dell Inspiron 13 7000 Series 2-in-1 7348 Inspiron 13 7348 Service Manual - Page 58
Using the pull tab disconnect the keyboard cable and the hard-drive, adhesive tape
View all Dell Inspiron 13 7000 Series 2-in-1 7348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3 Peel off the adhesive tape on the Windows-button board connector and disconnect the Windows-button board cable from the connector. 1 screws (2) 2 display-cable bracket 3 display cable 4 windows-button board cable 5 adhesive tape 4 Using the pull tab disconnect the keyboard cable and the hard-drive cable from the system board. 5 Release the connector latch and disconnect the keyboard-backlit cable from the system board. 6 Lift the connector latch and disconnect the touchpad cable from the system board. 58
3
Peel off the adhesive tape on the Windows-button board connector and
disconnect the Windows-button board cable from the connector.
1
screws (2)
2
display-cable bracket
3
display cable
4
windows-button board
cable
5
adhesive tape
4
Using the pull tab disconnect the keyboard cable and the hard-drive
cable from the system board.
5
Release the connector latch and disconnect the keyboard-backlit cable
from the system board.
6
Lift the connector latch and disconnect the touchpad cable from the
system board.
58