Dell Inspiron 13 7000 Series 2-in-1 7348 Inspiron 13 7348 Service Manual - Page 91
Replacing the Display Cable, Procedure, Post-requisites
View all Dell Inspiron 13 7000 Series 2-in-1 7348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the Display Cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Route the display cable through the routing guides on the display bezel. 2 Slide the display cable into the connector on the touch board and press down the latch to secure the cable. 3 Route the camera cable through the routing guides on the display bezel. 4 Adhere the adhesive tape, connect the touch-screen board cable to the touch-screen board and press down the connector latch to secure the cable. 5 Slide the Windows-button board cable into the connector on the Windows-button board and press down the latch to secure the cable. 6 Adhere the adhesive tape on the Windows-button board connector. Post-requisites 1 Replace the display back-cover and antenna assembly. 2 Replace the display assembly. 3 Replace the camera. 4 Replace the battery. 5 Replace the base cover. 91