Dell Inspiron 13 7352 Service Manual - Page 67
CAUTION: Place the computer on a soft and clean surface to avoid, scratching the display.
View all Dell Inspiron 13 7352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5 Peel off the tape on the Windows-button board connector, lift the latch and disconnect the Windows-button board cable from the system board. 1 antenna cables (2) 3 display-cable bracket 5 Windows-button board cable 2 screws (2) 4 display cable 6 tape 7 wireless card 6 Turn the computer over and open the display as far as possible. CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 7 Place the computer face down on a flat surface. 8 Peel off the tape that secures the display cable to the computer base. 9 Remove the screws that secure the display assembly to the computer base. 67
5
Peel off the tape on the Windows-button board connector, lift the latch
and disconnect the Windows-button board cable from the system board.
1
antenna cables (2)
2
screws (2)
3
display-cable bracket
4
display cable
5
Windows-button board
cable
6
tape
7
wireless card
6
Turn the computer over and open the display as far as possible.
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
7
Place the computer face down on a flat surface.
8
Peel off the tape that secures the display cable to the computer base.
9
Remove the screws that secure the display assembly to the computer
base.
67