Dell Inspiron 13 7352 Service Manual - Page 69
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 13 7352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 1 Place the display assembly on the computer base. 2 Align the screw holes on the display hinges with the screw holes on the computer base. 3 Replace the screws that secure the display assembly to the computer base. 4 Adhere the tape that secures the display cable to the computer base. 5 Close the display and turn the computer over. 6 Slide the Windows button-board cable into the connector on the system board and press down the latch to secure the cable. 7 Adhere the tape to the Windows button-board connector. 8 Connect the display cable to the system board. 9 Align the screw holes on the display-cable bracket with the screw holes on the system board. 10 Replace the screws that secure the display-cable bracket to the system board. 11 Connect the antenna cables to the wireless card. Post-requisites 1 Replace the heat sink. 2 Replace the fan. 3 Replace the battery. 4 Replace the base cover. 69