Dell Inspiron 14 3442 Owners Manual - Page 64
Replacing the System Board, Procedure, Post-requisites
View all Dell Inspiron 14 3442 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the system setup after you replace the system board. Procedure 1 Align the screw holes on the system board with the screw holes on the computer base. 2 Replace the screws that secure the system board to the computer base. 3 Connect the power-adapter-port cable and speaker cable to the connectors on the system board. 4 Slide the I/O-board cable into the connector on the system board and press down on the latch to secure the cable. 5 Adhere the display cable to the fan. 6 Slide the display cable into the connector on the system board and press down on the latch to secure the cable. 7 Adhere the tape that secures the display cable to the system board. Post-requisites 1 Replace the palm rest. 2 Replace the hard drive. 3 Replace the wireless card. 4 Replace the memory module(s). 5 Replace the base cover. 6 Replace the keyboard. 7 Replace the optical drive. 8 Replace the battery. 64