Dell Inspiron 14 5410 Inspiron 14 5418 Service Manual - Page 48

Installing the fan, Steps, Prerequisites, About this task, Next steps

Get Dell Inspiron 14 5410 PDF manuals and user guides View all Dell Inspiron 14 5410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Steps 1. Disconnect the fan cable from the system board. 2. Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly. 3. Lift the fan off the palm-rest and keyboard assembly. Installing the fan Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the fan and provides a visual representation of the installation procedure. Steps 1. Place the fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly. 4. Connect the fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. 48 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Steps
1.
Disconnect the fan cable from the system board.
2.
Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
3.
Lift the fan off the palm-rest and keyboard assembly.
Installing the fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the fan and provides a visual representation of the installation procedure.
Steps
1.
Place the fan on the palm-rest and keyboard assembly.
2.
Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
4.
Connect the fan cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
48
Removing and installing components