Dell Inspiron 14 5439 Owner's Manual - Page 16

Installing the Hard Drive, Removing the Coin-Cell Battery, Installing the Coin-Cell Battery,

Get Dell Inspiron 14 5439 PDF manuals and user guides View all Dell Inspiron 14 5439 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installing the Hard Drive 1. Place the hard drive assembly into its slot on the computer. 2. Install: a) battery b) base cover 3. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove : a) base cover b) battery 3. Perform the steps as shown in the illustration: a) Disconnect the coin-cell battery cable from its connector on the system board. b) Unroute the coin-cell battery cable from the routing channel. c) Lift and remove the coin-cell from the computer. Installing the Coin-Cell Battery 1. Place the coin-cell battery into its slot on the computer. 2. Route the coin-cell battery cable along the routing channel. 3. Connect the coin-cell battery cable to its connector on the system board. 4. Install : a) battery b) base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the WLAN Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) base cover b) battery 3. Perform the steps as shown in the illustration: 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Installing the Hard Drive
1.
Place the hard drive assembly into its slot on the computer.
2.
Install:
a)
battery
b)
base cover
3.
Follow the procedures in
After Working Inside Your Computer.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove :
a)
base cover
b)
battery
3.
Perform the steps as shown in the illustration:
a)
Disconnect the coin-cell battery cable from its connector on the system board.
b)
Unroute the coin-cell battery cable from the routing channel.
c)
Lift and remove the coin-cell from the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the computer.
2.
Route the coin-cell battery cable along the routing channel.
3.
Connect the coin-cell battery cable to its connector on the system board.
4.
Install :
a)
battery
b)
base cover
5.
Follow the procedures in
After Working Inside Your Computer.
Removing the WLAN Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
base cover
b)
battery
3.
Perform the steps as shown in the illustration:
16