Dell Inspiron 15 3531 Service Manual - Page 51
Replacing the Heat-Sink Assembly, Procedure, Post-requisites - fan
View all Dell Inspiron 15 3531 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Replacing the Heat-Sink Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. Procedure 1 Clean the thermal grease from the bottom of the heat-sink assembly and reapply it. 2 Align the screw holes on the heat-sink assembly with the screw holes on the system board. 3 In sequential order (indicated on the heat-sink assembly), replace the screws that secure the heat-sink assembly to the system board. 4 Connect the fan cable to the system board. Post-requisites 1 Follow the procedure from step 2 to step 7 in "Replacing the System Board". 2 Replace the palm rest. 3 Replace the wireless card. 4 Replace the keyboard. 5 Follow the procedure from step 3 to step 5 in "Replacing the Hard Drive". 6 Replace the base cover. 7 Replace the battery. 51