Dell Inspiron 15 3531 Service Manual - Page 62
Replacing the Display Assembly, Procedure, Post-requisites
View all Dell Inspiron 15 3531 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the display hinges with the screw holes on the computer base. 2 Replace the screws that secure the display hinges to the computer base. 3 Route the display cable through the routing guides on the computer base. 4 Connect the display cable to the system board and adhere the tape to the display cable. 5 Route the antenna cables through the routing guides on the computer base. 6 Connect the antenna cables to the wireless card. See "Replacing the Wireless Card". 7 Close the display and turn the computer over. 8 Replace the screws that secure the display hinges to the computer base. 9 Turn the computer over and open the display as far as possible. Post-requisites 1 Replace the palm rest. 2 Replace the keyboard. 3 Replace the optical-drive filler. 4 Replace the base cover. 5 Replace the battery. 62