Dell Inspiron 15 5565 Inspiron 15 5000 Service Manual - Page 64
Replacing the system-board assembly, Procedure
View all Dell Inspiron 15 5565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
GUID-828BE30D-72EC-4782-A72D-288087A2AB2F Replacing the system-board assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. GUID-0F6C8740-9AC5-4E04-87E5-9BD430222F1B Procedure 1 Replace the heat-sink assembly. 2 Connect the power-adapter port cable and power-button board cable to the back of the system board. 3 Carefully turn the system board over. 4 Using the alignment post, place the system board on the palm rest and keyboard assembly. 5 Align the screw hole on the system board with the screw hole on the palm and keyboard rest assembly. 6 Replace the screw that secures the system board to the palm rest and keyboard assembly. 7 Replace the screw that secures the heat-sink assembly to the system board. 8 Slide the speaker cable and coin-cell battery cable into the connectors on the system board. 64