Dell Inspiron 15 7558 Service Manual - Page 66
Replacing the display assembly, Procedure, Post-requisites - screen replacement
View all Dell Inspiron 15 7558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 1 With the display screen facing down, align the screw holes on the display hinges with the screw holes on the computer base. 2 Replace the screws that secure the display assembly to the computer base. 3 Turn the computer over and close the display. 4 Turn the computer over. 5 Slide the Windows button-board cable into the system-board connector and press down on the latch to secure the cable. 6 Adhere the tape to the Windows button-board connector. 7 Connect the display cable to the system board. 8 Align the screw holes on the display-cable bracket with the screw holes on the system board. 9 Replace the screws that secure the display-cable bracket to the system board. 10 Adhere the tape that secures the display cable to the display hinge. 11 Route the antenna cables through the routing guides on the computer base and adhere the tape that secures the antenna cables to the display hinge. 12 Connect the antenna cables to the wireless card. See "Replacing the wireless card". Post-requisites 1 Replace the battery. 66