Dell Inspiron 16 Plus 7620 Service Manual - NVIDIA GeForce RTX 3060 - Page 44

System board, Removing the system board

Get Dell Inspiron 16 Plus 7620 PDF manuals and user guides View all Dell Inspiron 16 Plus 7620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Steps 1. Place the power button with optional fingerprint reader on the palm-rest and keyboard assembly. 2. Align the screw hole on the power button with optional fingerprint reader with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x1.8) that secures the power button with optional fingerprint reader to the palm-rest and keyboard assembly. 4. Adhere the Mylar back over the fingerprint-reader cable. 5. Connect the fingerprint-reader cable to the system board and close the latch. Next steps 1. Install the power-button board. 2. Install the heat sink. 3. Install the left fan. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. 2. Remove the base cover. 3. Remove the memory module. 4. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever applicable. 5. Remove the wireless card. 6. Remove the heat sink. 7. Remove the left fan. 8. Remove the right fan. 44 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Steps
1.
Place the power button with optional fingerprint reader on the palm-rest and keyboard assembly.
2.
Align the screw hole on the power button with optional fingerprint reader with the screw hole on the palm-rest and keyboard
assembly.
3.
Replace the screw (M2x1.8) that secures the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
4.
Adhere the Mylar back over the fingerprint-reader cable.
5.
Connect the fingerprint-reader cable to the system board and close the latch.
Next steps
1.
Install the
power-button board
.
2.
Install the
heat sink
.
3.
Install the
left fan
.
4.
Install the
base cover
.
5.
Follow the procedure in
After working inside your computer
.
System board
Removing the system board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
Before working inside your
computer
.
2.
Remove the
base cover
.
3.
Remove the
memory module
.
4.
Remove the
M.2 2230 solid-state drive
or
M.2 2280 solid-state drive
, whichever applicable.
5.
Remove the
wireless card
.
6.
Remove the
heat sink
.
7.
Remove the
left fan.
8.
Remove the
right fan.
44
Removing and installing components