Dell Inspiron 17 7746 Service Manual - Page 35
Removing the Cooling Assembly, Prerequisites, Procedure
View all Dell Inspiron 17 7746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Removing the Cooling Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/ regulatory_compliance. Prerequisites 1 Remove the battery. See "Removing the Battery" on page 10. 2 Follow the instructions from step 1 to step 3 in "Removing the Optical Drive" on page 16. 3 Follow the instructions from step 1 to step 3 in "Removing the Hard Drive" on page 19. 4 Remove the keyboard. See "Removing the Keyboard" on page 22. 5 Remove the base cover. See "Removing the Base Cover" on page 26. Procedure 1 Using the pull tab, disconnect the display cable from the system board. 2 Note the routing and remove the display cable from its routing guides on the fan. 2 1 1 display cable 3 pull tab 3 2 routing guide Removing the Cooling Assembly | 35