Dell Inspiron 20 3043 Service Manual Battery - Page 56
Replacing the Heat Sink, Procedure, Post-requisites
View all Dell Inspiron 20 3043 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Replacing the Heat Sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. NOTE: The original thermal grease can be reused if the original system board and heat sink are reinstalled together. If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to make sure that thermal conductivity is achieved. Procedure 1 Align the screw holes on the heat sink with the screw holes on the system board. 2 Tighten the captive screws that secure the heat sink to the system board. Post-requisites 1 Follow the instructions from step 3 to step 15 in "Replacing the System Board". 2 Replace the wireless card. 3 Follow the instructions from step 3 to step 6 in "Replacing the Back Cover". 56