Dell Inspiron 20 3043 Service Manual Battery - Page 69
Replacing the Display Assembly, Procedure, Post-requisites
View all Dell Inspiron 20 3043 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the display panel on a flat and clean surface. 2 Align the screw holes on the display-panel brackets with the screw holes on the display panel. 3 Replace the screws that secure display-panel brackets to the display panel. CAUTION: Make sure that no cables are under the display panel. 4 Align the screw holes on the display-panel brackets with the screw holes on the display bezel and adhere the display panel to the display bezel. 5 Replace the screws that secure the display-panel brackets to the display bezel. 6 Connect the display cable to the display panel and adhere the tapes to secure the display cable on the display panel. 7 Connect the display-backlight cable to the display panel. Post-requisites 1 Follow the instructions from step 7 to step 15 in "Replacing the System Board". 2 Replace the antenna. 3 Replace the wireless card. 4 Replace the power-status light board. 5 Replace the speakers. 6 Replace the battery. 69