Dell Inspiron 20 3048 Owners Manual - Page 55
Replacing the Power-Adapter Port, Procedure, Post-requisites
View all Dell Inspiron 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Replacing the Power-Adapter Port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Slide the power-adapter port into the bracket on the display-panel base. 2 Align the screw hole on the power-adapter port with the screw hole on the bracket on the display-panel base. 3 Replace the screw that secures the power-adapter port to the bracket on display-panel base. 4 Route the power-adapter port cable on the system board and connect the cable to the system board. Post-requisites 1 Replace the VESA-mount bracket. 2 Replace the system-board shield. 3 Replace the back cover. 4 Follow the procedure from step 3 to step 5 in "Replacing the Stand Assembly". 55