Dell Inspiron 3052 AIO Inspiron 20 3052 Service Manual - Page 47
Replacing the system-board shield, Procedure, Post-requisites
View all Dell Inspiron 3052 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing the system-board shield WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the slots on the system-board shield with the ports on the system board and place the system-board shield on the display-assembly base. 2 Align the screw holes on the system-board shield with the screw holes on the display-assembly base. 3 Replace the screws that secure the system-board shield to the displayassembly base. Post-requisites 1 Replace the back cover. 2 Follow the procedure in step 4 in "Replacing the optical drive". 3 Replace the stand. 47