Dell Inspiron 3052 AIO Inspiron 20 3052 Service Manual - Page 68
Removing the display cable, Prerequisites, Procedure
View all Dell Inspiron 3052 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removing the display cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stand. 2 Follow the procedure from step 1 to step 2 in "Removing the optical drive". 3 Remove the back cover. 4 Remove the memory module. 5 Remove the wireless card. 6 Remove the control-buttons board. 7 Remove the microphone. 8 Remove the system-board shield. 9 Remove the heat sink. 10 Remove the system board. Procedure 1 Peel off the tape that secures the display cable to the display assembly. 2 Press the clips and disconnect the display cable from the display assembly. 68