Dell Inspiron 3455 AIO Inspiron 24 3455 Service Manual - Page 73
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 3455 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Slide the display cable through the slot on the display-assembly base. 2 Slide the tabs on the display bezel into the slots on the display-assembly base. 3 Replace the display-assembly base on the display bezel. 4 Replace the screws that secure the display-assembly base to the display bezel. 5 Route the optical drive and hard drive cables through the routing guides on the display-assembly base. Post-requisites 1 Replace the control-buttons board. 2 Replace the speakers. 3 Replace the speaker cover. 4 Replace the VESA-mount bracket. 5 Replace the system board. 6 Replace the camera. 7 Replace the microphone. 8 Replace the coin-cell battery. 9 Replace the fan. 10 Replace the heat sink. 73