Dell Inspiron 530S Owner's Manual - Page 87
has a bootable operating system or remove the floppy disk from drive A and restart, the computer. - replacing motherboard
View all Dell Inspiron 530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
N O B O O T D E V I C E A V A I L A B L E - No bootable partition on HDD or Not a bootable floppy in floppy driver, or HDD/Floppy cable loose, or No bootable device exists. • If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive. • If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a boot device. • Enter system setup and ensure that the boot sequence information is correct (see "Entering System Setup" on page 185). N O T I M E R T I C K I N T E R R U P T - A chip on the system board might be malfunctioning or motherboard failure (see "Contacting Dell" on page 200 for assistance). N O N - S YS T E M D I S K O R D I S K E R R O R - Replace the floppy disk with one that has a bootable operating system or remove the floppy disk from drive A and restart the computer. NOT A BOOT DISKETTE - Insert a bootable floppy disk and restart your computer. U S B O V E R C U R R E N T E R R O R - Disconnect the USB device. Use external power source for the USB device. NOTICE - HARD DRIVE SELF MONITORING SYSTEM HAS REPORTED THAT A PARAMETER HAS EXCEEDED ITS NORMAL OPERATING RANGE. DELL RECOMMENDS THAT YOU BACK UP YOUR DATA REGULARLY. A PARAMETER OUT OF RANGE MAY O R M A Y N O T I N D I C A T E A P O T E N T I A L H A R D D R I V E P R O B L E M . - S.M.A.R.T error, possible HDD failure. This feature can be enabled or disabled in BIOS setup. Troubleshooting Tools 87