Dell Inspiron 537 Service Manual - Page 4

Front Bezel - manual

Page 4 highlights

Back to Contents Page Front Bezel Dell™ Inspiron™ 535/537/545/546 Service Manual Removing the Front Bezel Replacing the Front Bezel WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.) removed. Removing the Front Bezel 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 1 bezel 2 bezel grips (3) 3 bezel clamps (3) 4 bezel inserts (3) 3. Grasp and lift the bezel grips one at a time to release it from the front panel. 4. Rotate and pull the bezel away from the front of the computer to release the bezel clamps from the bezel inserts. 5. Set aside the bezel in a secure location. Replacing the Front Bezel 1. Align and insert the bezel clamps in the bezel inserts. 2. Rotate the bezel towards the computer until the bezel grips snap into place. 3. Replace the computer cover (see Replacing the Computer Cover). Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

Back to Contents Page
Front Bezel
Dell™ Inspiron™ 535/537/545/546 Service Manual
Removing the Front Bezel
Replacing the Front Bezel
Removing the Front Bezel
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Grasp and lift the bezel grips one at a time to release it from the front panel.
4.
Rotate and pull the bezel away from the front of the computer to release the bezel clamps from the bezel inserts.
5.
Set aside the bezel in a secure location.
Replacing the Front Bezel
1.
Align and insert the bezel clamps in the bezel inserts.
2.
Rotate the bezel towards the computer until the bezel grips snap into place.
3.
Replace the computer cover (see
Replacing the Computer Cover
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
1
bezel
2
bezel grips (3)
3
bezel clamps (3)
4
bezel inserts (3)