Dell Inspiron 5570 Inspiron 15 5000 Service Manual - Page 20
Replacing the base cover, Procedure, For computers shipped without optical drive, Post-requisites
View all Dell Inspiron 5570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
6 Replacing the base cover NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure • For computers shipped without optical drive • Post-requisites Procedure 1. Connect the battery cable to the system board, if applicable. CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the poweradapter port when you snap the base cover to the computer base. 2. Place the base cover on the palm rest and keyboard assembly, and snap the base cover into place starting from the power-adapter port. 3. Replace the six screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly. 4. Replace the two screws (M2x2) that secure the base cover to the palm rest and keyboard assembly. (Only for computers shipped with optical drive) 5. Replace the screw (M2x4) that secures the base cover to the palm rest and keyboard assembly. 6. Tighten the three captive screws that secure the base cover to the palm rest and keyboard assembly. For computers shipped without optical drive 1. Connect the battery cable to the system board, if applicable. CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the poweradapter port when you snap the base cover to the computer base. 2. Place the base cover on the palm rest and keyboard assembly, and snap the base cover into place starting from the power-adapter port. 3. Replace the six screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly. 4. Replace the screw (M2x4) that secures the base cover to the palm rest and keyboard assembly. 5. Tighten the three captive screws that secure the base cover to the palm rest and keyboard assembly. Post-requisites Replace the optical drive (optional). 20 Replacing the base cover