Dell Inspiron 5675 Service Manual - Page 67
Removing the processor-cooling assembly, Prerequisites, Procedure
![]() |
View all Dell Inspiron 5675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
45 Removing the processor-cooling assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Prerequisites • Procedure Prerequisites Only with computers shipped with AMD Ryzen 3/Ryzen 5/Ryzen 7 processors Remove the right-side cover. Procedure Only with computers shipped with AMD Ryzen 3/Ryzen 5/Ryzen 7 processors 1. Lay the computer on the left side and disconnect the fan cable from the system board. 2. Disconnect the processor-cooling assembly cable from the system board. 3. In sequential order (as indicated on the processor-cooling assembly), loosen the four captive screws that secure the processor-cooling assembly to the system board. 4. Remove the screw (6-32UNCx3.6) that secures the fan to the chassis. 5. Lift and release the fan from the chassis. 6. Lift the processor-cooling assembly along with the fan off the system board. Removing the processor-cooling assembly 67
![](/manual_guide/products/dell-inspiron-5675-service-manual-c01425e/67.png)