Dell Inspiron 5675 Service Manual - Page 69
Replacing the processor-cooling assembly, Procedure, Post-requisites
View all Dell Inspiron 5675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
46 Replacing the processor-cooling assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure • Post-requisites Procedure Only with computers shipped with AMD Ryzen 3/Ryzen 5/Ryzen 7 processors 1. Align the four captive screws on the processor-cooling assembly with the slot on the system board. 2. In sequential order (as indicated on the processor-cooling assembly), tighten the captive screws that secure the processor-cooling assembly to the system board. 3. Align the tabs on the fan with the slots on the chassis and place the fan in position. 4. Replace the screw (6-32UNCx3.6) that secures the fan to the chassis. 5. Connect the processor-cooling assembly cable to the system board. 6. Place the computer in an upright position. 7. Connect the fan cable to the system board. 8. Place the computer in an upright position. Post-requisites Replace the right-side cover. Replacing the processor-cooling assembly 69